As Per Is : 1659:2004

Block Board Bwp Grade

Swadesh Block Board is a lumber-core board made from blocks of wood as per IS: 1659:2004 and available in three grades with usage depending upon the end use of the product.

  1. BWP exterior grade commercial type Block Board made of 100% Meghalayan pine woods frame and fillers bonded with phenol formaldehyde synthetic resin as per IS:848, hot pressed with a Combination of Gurjan face veneer and preservative treated cross core & panes core in both side as per IS specifications.
  2. BWP exterior grade commercial type Block Board made of high density Hard woods frame and fillers bonded with phenol formaldehyde synthetic resin as per IS:848 fortified with glue line preservative, hot pressed with a combination of Gurjan face veneer, cross core & panel core in both side IS specifications.
  3. MR inferior grade commercial type Block Board made of Hard woods frame and fillers bonded with melamine formaldehyde synthetic resin fortified with glue line preservative, hot pressed with a combination of Gurjan face veneer, Cross Core & panel Core in both side IS specifications.

Features:

It is carpenter friendly, easy on tools and excellent screws and nails holding capacity.
It is made of kiln seasoned and chemically treated durable species of timbers only.
It has a warp free smooth Surface, free from Corrugation and gaps.
It is dimensionally Stable and highly resistant to termites and other wood-destroying organisms.

Block Board Technical Specification:

Sl. No. Test Prescribed in IS: 1659 – 1990 Minimum Value for Conformity Observed Value
1.

Dimensional changes caused by humidity

There shall be no de-lamination in the extreme range of humidity Dimensional change shall not be more than +1 mm in local planeness

No de-lamination observed. Dimensional change within the specified limit
2.

Water Resistance

There shall not be any de-lamination after 72 hours boiling.

No de-lamination observed.
3.

Adhesion of Piles

Minimum pass standard

Excellent
4.

Modulus of Test

No appreciable sign of separation edge.

Satisfactory
5.
Modulus of Rupture
50 N/sq.mm
67 sq.mm
6.
Modulus of Elasticity
5000 N/sq.mm
6025 N/sq.mm

Contact Information:

Call for Help:

+91 7501386290
+91 7501386291

Mail for information:

Swadeshplywoods@gmail.com
Swadeshply.mkt@gmail.com

Submit Form: